The maintenance this time is for the Fanuc high-speed spot welding robot R-1000iA/100F for the right rear longitudinal beam assembly and the rear floor sub assembly.

Daily maintenance content of Fanuc robotic arm R-1000iA/100F:

1. Is the noise and vibration of R-1000iA/100F normal, and is the motor temperature normal.

2. Can the surrounding facilities of R-1000iA/100F work properly.

3. Is the holding brake of R-1000iA/100F five axes normal.

Fanuc Robot R-1000iA/100F Three month Maintenance Content:

1. Check and clean the cables in the control section;

2. Check and clean the ventilation of the controller;

3. Check and clean the cables of the body;

4. Whether the fixing condition of the connectors is good;

5. Tighten the cover plate and various accessories on the machine;

6. Remove dust and debris from the machine;

Six month maintenance content for Fanuc robotic arm R-1000iA/100F:

Replace the lubricating oil of the balance block bearing, and refer to the maintenance content of the three-month cycle for others.

Fanuc Robot R-1000iA/100F Annual Maintenance Content:

Replace the battery on the robot body, and refer to the six-month maintenance schedule for other details.

Fanuc robotic arm R-1000iA/100F three-year maintenance content:

Replace the lubricating oil of the robot reducer, and refer to the one-year maintenance schedule for other details.